Edit Noon report data can be done in the office with the user role "Noon Report Master"
|
1.Go to "Operations" > Noon Reports". 2.Select the vessel where the Noon report has to be corrected in the vessel tree 3.Select the Noon report filed which has to be corrected 4.Click on "Edit" 5.Change the value and enter a remark if needed 6.Press "Save"
|
Check corrected Noon report data (Audit log)
|
1. Go to "Operations" > Noon Reports" and select the vessel where the Noon report has to be corrected in the vessel tree 2. Select the Noon report filed which have been corrected 3. Click on "Show Audit Log"
!! All edited Noon reports are markrd with a grey boarder
|
|
